Find what do you need...

mercoledì 2 giugno 2010

How to Repair JAF-Box Affected by Zulea's 3rd Tools




This is the pinout of LPT port explanation...


Signals SCK and RESET are injected by a Test Point probe (One hand holding)


Signals MOSI and MISO are injected by RJ-45 cable plugged into JAF SERVICE CABLE PORT


The power supply is provided by a normal USB cable (In JAF USB Uplink)



LPT Port pin N°:

1:5 NO CONNECTION
6 (SCK)---------------> Test point probe in ATmega128 (SCK)
7 (MOSI)--------------------------------------->RJ-45 (Pin 4)
8 NO CONNECTION
9 (RESET)-------------> Test point probe in ATmega128 (Reset)
10 (MISO)--------------------------------------->RJ-45 (Pin 5)
11:25 NO CONNECTION


For More: www.all-unlock.com 
...Register Now, It's Free!!!

MTBox v 2.35.1 Released !



20.04.2010 - MT Box Nokia - MTB NK v2.35.1 Release note:

  • Fixed bug with Rapido phones

Download:
MTB NK v2.35.1
MTB NK v2.34 full setup - Required

ATF [Advance Turbo Flasher] version 4.80 Update!! 20 APR 2010



-Feb 22, 2010- 
ATF New Beta Version 3.0 Released

UNLOCK & REPAIR

* Can Repair Super dongle key of SL1,SL2,Sl3
* Can Repair Sim Lock Data of SL1,SL2
* Can Remove Simlock Via Codes of SL1,SL2,
* Can Remove Simlock for so called "SL3"
(New RAPIDO)
* 5800d (RM-356) - v31.0.008 - v30.0.011 - v31.0.101
* 6790s-1c (RM-492)
* 6790s-1b (RM-599)
* E63 (RM-437) - v400.21.013
* E71 (RM-346) - v400.21.013
* N96 (RM-247) - v30.033 - v30.101

More Stable BB5 FBUS Flashing (Support New PROTOCOL)

and fix some flashing bugs as reported by users in previous version now software will be more stable

http://advance-box.com/atfsoft/AdvanceBox_BETA_V3.rar

MTBox Update Tool Ver 3.18 released.

MT Box update tool allows you to:

* To read your MT Box information
* To check what module your box has activated
* To activate available MT Box modules -
* To read your “Box Account” credits information -
* Update your MT Box to latest available version
* To use your MT Box as “PKD-1 dongle” – Nokia service device and run “Phoenix” – Nokia service software
* To go to GT support forum
* Login to GT support
* To read your MT Box serial number – MT Box sn
* To read how many times each MT Box software is started
* To reset your MT Box name to default

Download Megaupload Link
Download Direct Link

MTBox Credits Generator [MTBCG] Ver 1.1 Server Ver 1.0118042010 released.



- Sl20 Credits direct added (faster) to box released
- Sl20 Credits an old credits possible transfer many times to same payment details
- New deta transfer protocol added
- New paypal/credit cards veryfication protocol added
- Old and new database support added
- New user manual added


Download links :

MTBox Credits Generator Ver 1.1 (rapidshare link)

MTBox Credits Generator Ver 1.1 (hotfile link)
MTBox Credits Generator Ver 1.1 (direct link)
PDF Files Reader

MX-Key Partial Update

Partial update of Nokia DCT4PLUS Unlocker.

Whats New:
- Changed server configuration to fix activation problem

- Message when press button "server login" has been changed due the confusion of unlock DCT4PLUS credits and the old RPL credits

If your MXKEY is ACTIVATED with DCT4PLUS module will show:MXKEY Serial: C0810000
Available DCT4PLUS Unlock Credit: 0
DCT4PLUS Activation Status: ACTIVATED

If your MXKEY is NOT ACTIVATED with DCT4PLUS module and you didn't purchase yet credits for activate this, will show:MXKEY Serial: C0810000
Available DCT4PLUS Unlock Credit: 0
DCT4PLUS Activation Status: NOT ACTIVATED

If your MXKEY is NOT ACTIVATED with DCT4PLUS module and you purchased credits for activate this and you didn't activated yet, will show:MXKEY Serial: C0810000
Available DCT4PLUS Unlock Credit: 100
DCT4PLUS Activation Status: NOT ACTIVATED




To update:
1. Goto Options->Module, select "Nokia Unlocker" and click "Update"


You will get this result:

» Nokia Unlocker
Version from module: 1.0.0.146
Version from server: 1.0.0.155
Partial update available.

GET: mobileEx.lib OK
GET: nkc.mx OK
Update completed, please restart application.

CycloneBox Present Free DCT4+ Unlock including RSA protected phones



Hello,
you can download latest beta from here:
DOWNLOAD
all DCT4+ phones are supported including 1661 , 1662 , 1208, 5030 etc


(please use it only for test DCT4 RSA purposes, full stable installer will be released tonight or tomorrow with some other great and unique features.).

Don't forget to upgrade box firmware!

Post unlocked phones log in above 
link

MX-Key v3.3 revision 1.8 FULL INSTALLER

error msg "library version outdated" for HTC, Vodafone or Huawei solved


all modules added with this installer:

- Nokia DCT4PLUS Unlocker

- FREE MXKEY HTC Unlocker tool

- FREE Vodafone Unlocker

- FREE Huawei Unlocker

- FREE HTC Unlocker

- FREE BlackBerry Tool (Flasher, Unlocker and MEP Code Calculator)


DIRECT LINK FOR v3.3 revision 1.8 FULL INSTALLER

MTBox v2.35 1202, 1661, 1662, 5030 Free unlock for all SL20 activated





15.04.2010

1202, 1661, 1662, 5030 Free unlock for all SL20 activated MT box

Download




v3.3 revision 1.8, Public-Release 



DIRECT LINK FOR v3.3 revision 1.8, Public-Release



MAIN
- Major changes for sign application routine to avoid server overload.
- Improved First time activation process, will automaticaly updating license 0,1,2 and signing application. 


NK
- Added, "Export as Text" option for VCARD backup
- DCT4PLUS Direct Unlock implemented, for activation please use 'Nokia Unlocker' module.
- BB5 Slow flash bug fixed.


Added nkc.mx module to the main setup.

domenica 2 maggio 2010

30.04.2010 - Phoenix service software v2010_12_8_42304 Original

MULTI-PROTOCOL PHOENIX SERVICE SOFTWARE
V 2010_12_8_42304
1. CHANGE HISTORY
2. INTRODUCTION
New version of Phoenix service software is available. This multi-protocol service software supports Nokia
CDMA, GSM, TDMA, and WCDMA products.
Please note:
· This is the first Phoenix Service Software version which uses new connection manager
FUSE. Please see “known errors and limitations” for troubleshooting and “appendix 1” for
instructions concerning use.
· This version should be used together with the latest Tucson Add-On Installation Package
v.2010_10_9_41709. Please see ASB_MPP_062.pdf for details.
Service SW installation packages and Technical Bulletins are available from NOL.
Main component versions in the release:
· DK2 Driver Version 07.14.0.25
· Nokia Connectivity Cable USB Driver Version 7.1.27.0
· Flash Update Package 09.050.025
· FLS-x Drivers Version 2.09.28


DOWNLOAD <

MX-Key Partial update of Nokia Service Tool

Partial update of Nokia Service Tool.

Whats New: 

1.1 Added, BB5 RFBB restore from server
How to:
- on the PM tab, make "SUPER SD AUTH" or "PMM AUTH"
- tick 'Load RFBB from Server'
- Click 'Write'


1.2 Fixed, BB5 slow flashing(dead after flash)



To update:
1. Go to Options->Module, select "Nokia Service Tool" and click "Update"


You will get this result:

» Nokia Service Tool
Version from module: 1.0.0.12811
Version from server: 1.0.0.12843
Partial update available.
Whats New:
Added, BB5 RFBB restore from server
Fixed, BB5 slow flashing(dead after flash)

GET: mobileEx.lib -> hash is valid, no need an update.
GET: productapiconfiguration.xml -> hash is valid, no need an update.
GET: nk.mx OK
Update completed, please restart application.

mercoledì 28 aprile 2010

Cyclone MAJOR Update 
- New FBUS Protocol (X3,X6) 
- DCT4RSA(1661,5030) 
- COM Emulator




Hello, New Cyclone Box Installer is READY.

What's new?

=====================
Installer v1.05
23.04.2010
=====================
- Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones - E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
- Added support for BB5 FBUS New Protocol APE Loaders
- Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
- Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
- Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
- Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
- Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
- Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"
- Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !
- Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not ready",etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:

GR0103D101260C206C02
GR0103D101260C213402
GR0103D10126095A1F05
GR0103D10126095A1F07
GR0103D10126095A1F87
GR0103D1012601022C00
GR0103D1012601022E05
GR09733814140C206C02
GR0973381414095A1F05
GR0973381414095A1F07
GR0973381414095A1F87
GR097338141401022C00
ISL2TI020000093E2F30
NI00IIIIRR030C20C607
NI00IIIIRR03095B1F00
NI00IIIIRR03095B1F01
NI00IIIIRR030102F200
NI00IIIIRR030102F201
NI00IIIIRR030102F202
NI00IIIIRR030102F203
NI00IIIIRR0301035420
NIMMIIIIRRFF0A021001
NIMMIIIIRRFF094B2F01
NIMMIIIIRRFF06150018
NIMMIIIIRRFF06150110
ST090404003C06150018
ST090404004C06150018

- Added TX2 warning when certificate is being not accepted (common problem while writing RPL)
- Updated Nokia USB Connectivity Drivers to 7.1.22.0
- Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)
- Folder "StoredFiles" is no longer marked to Delete upon Uninstallation to keep old backup files
- Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up
- Factory defaults after flash are now defaultly ticket (BB5,DCT4)
- Mode transition manager added in firmware v01.37
- Software accept Mode Transision to "Normal" when phone goes to "Power Off"
- Flash Variants are displayed now in descending order
- SL Array readen now upon RPL Backup is Keyb/FBUS Count masked
- Now, all 7 codes are being sent to phone (some phones don't accept +7 codes - tested on N71)
- Fixed NCK Calculation for some mobiles (Security Section Checksum Error)
- When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database
- Fixed smartcard not responding for reset in some configurations
- Fixed "Failed to Read SP Info" on older RAPv2 phones
- Path manager - bug "/" fixed
- Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)
- SX4 Bypass is removed now (no need anymore)
- Improved sending CMT Secondary Loader
- Fixed TX2 test crash when phone is completly erased (TOC erased)
- Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database
- Improved Security Analysis, added HWC/CCC/Variant Certs Check
- Box Firmware : 01.0C, Access Violation Fixed
- Runtime Error when "Disable Skins" enabled fixed
- Taksbar problems fixed
- Fixed 1208 UEM Read/IMEI Rebuild
- N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)
- New Nokia Firmware introduced, improved stability a lot
- DCT4Plus relock fixed
- Mode transition improved
- BB5 USB Flashing fixed
- Factory Set problems fixed
- Fixed problems when dealing with RAP3v2 Phones
- Skin manager upgraded to v6.63
- HW Platform is now being readen upon Box Initialization
- Added support for CTF'2010 Platform
- Flashbus writing speed increased about 10%
- Flashbus FUR messages reading speed increased about 40%
- BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..
- After flashing, added average writing speed display
- BootAgent removed, now Bootloader upgrade is managed by middle-loader
- Main Firmware rewritten from scratch, old bugs gone away.
- MPU Added
- Improved Oscillator startup time, box hangup fixed in some cases
- Realtime clock not used anymore, too much hardware problems when box not started
- Fixed booting dead BB5 mobiles
- If bb5 booting fails, SW displays possible reason reported by new firmware
- BB5 is being try to boot now without hardware VCC switch
- Added USB Dualport transactions (increases speed)
- Added old protocols support (tick "Use Old Protocols Loader")
- Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)
- BB5 flash_block_Data checksum fixed
- Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)
- Fixed boot when after activating DCT4 FTD phone comes to dead
- Fixed "Failed to decode MSID" when flashing some PPM DCT4 files
- UPP ID is now represented as hex upon Read Info
- Added detection whether Pri/Sec camera exists or is configurable
- Minor changes and bugfixes
- Black Skin introduced
- Fixed DCT4 Unlock not being executed after Flashing Procedure
- Versions snap
Installer v1.05
Main x86 Application v1.0.0.9392
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.10
Onboard Main Nokia Application v01.37
Onboard COM Emulation Code v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.22.0
BB5 USB/FPIF Single Line/FPIF DualLine v20100410
DCT4 FPIF Single Line/USB v20100410
DCT4 Unlock Patches DEPRECATED
Communication Stack SSLv3-keys-06092008
Skin Stack v6.63

Thanks to all contributors which supporting us! Thanks Moulnisky, ptt, Honey... Thanks arash & others...

Where to download?
Main Link: RapidShare: 1-CLICK Web hosting - Easy Filehosting

!!CYCLONE - STOP ME IF YOU CAN!!
FREE DCT4 Plus RSA UNLOCKER v0.1.1 with UFS Support



* Free DCT4++ RSA all models unlock
* Can repair any damages in Simlock area on ANY DCT4 ASIC 11 based phone and upload Simlock RPL part (SLData), even on empty boards
* You do not need any LOGS, CREDITS, ACTIVATIONS or box except UFS/JAF interface
* To unlock DCT4++ phones please use Unlock button
* Do not need to worry about firmware and UPP version
* No more patch files
* Phones are really unlocked
* You can use both FBUS and Easy Cable
* Safe software (this software does not kill any other devices)
* Working with JAF interface (also with dead boxes)
Working with UFS interface
* Calculation is server based and take about 1 second per phone and is totally free for all
What's new ?

- UFS/Twister/Tornado Interface added
- Major bugs fixed
Supported NOKIA models:

1110i, 1112b, 1200, 1202, 1208, 1208b, 1209, 1600b, 1661, 1662, 1650, 1680 Classic, 1680 Classic-2b, 2220 Slide, 2310, 2320 Classic, 2320 Classic-2b, 2323 CLassic, 2330 Classic, 2600, 2600a, 2610, 2610b, 2626, 2630, 2630b, 2660, 2660b, 2680 Slide, 2720 Fold, 2760, 2760b, 2760h, 5000, 5030 XM, 6030b, 7070 Prism, 7100 Supernova
More info at DCT4++ Unlocker
Download link
PLEASE use only this location to download the software. In other case please verify exe file hash:
SHA-1: C83657AA24150825880BF18C577F25B386720462
MD-5: 8383014D2A5280E00ABE6BF0B1B235DD
100% FREE
v3.3 revision 1.8+fix, Public-Release

DIRECT DOWNLOAD LINK MXKEY v3.3 revision 1.8+fix:



MAIN
- Improved check for update routine.
- Application will check new version on start up, if update found balloon tooltips will be displayed.



NK
- Fixed, DCT4 UFS flashing bug
- Fixed, BB5 UFS flash bug on rev 1.8.

- BootLoader not responding, mostly RAM problem - FIXED


HTC
- fixed crash on startup due to "winusb.dll" not found.


WARNING:
Disable your antivirus, download, install and put it in exclusion list.


Public discussion thread:
[MXKEY - BOMB] Public discussion about v3.3 revision 1.8

ATF [Advance Turbo Flasher] official thread for UPDATES:
http://forum.gsmhosting.com/vbb/f609...2010-a-937102/


ATF [Advance Turbo Flasher] version 4.80 Update - Public discussion thread:
ATF [Advance Turbo Flasher] version 4.80 Update - Public discussion thread


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box 
Vietnam: Saigonmobile

The Master Piece


MT Box Nokia – MTB NK v2.35.1


- Download Now (Setup Require MTB NK 2.34 Full preinstalled, you can download it from here)

Release note:

If you does not activate SL20 module on your MT box you have missed some features for very reasonable price – only 20 GT server credits

SL20 module activation grants you:

  • Free unlock for all SL20 supported phones
  • Free SD repair for all supported BB5 phones
  • Free unlock for all DCT4+ supported phones
  • Free unlock for new DCT4+ 1202, 1661, 1662, 5030 etc
  • Free SP data repair on all DCT4+ phones
  • Next update?

How to use free DCT4+ unlock if SL 20 module activated on your box:

In MTB NK software in server tab enter login details:

User name: boxlogin
Password: boxlogin

How to activate SL20 module on your box using box credits:

How to check which module you have activated on your box:


How to activate SL20 module using MT PRO and GT server credits:

  • Visit the link: http://www1.gtibox.com/support/bb5sl20rpl.php
  • Enter your MT Box serial number – SN
  • Enter your GT server or MT PRO user name
  • Enter your GT server or MT PRO password
  • Select – I want to use this server account to enable MT-Box serial number specified above for Standalone BB5 SL20 RPL Activation!
  • Click to Activate BB5 SL20 RPL button
  • Download MT Tool
  • Connect your MT box to USB
  • Run MT Tool.exe from directory where is MTB_NK.EXE (i.e. where is located file griffin.ini in most cases C:\Program Files\GriffinTeam\MT-box) and click button ‘Update’.
  • Do not use MT Box update tool v3.17 or older because will not work